Low Pressure Molding Machine
Low pressure molding system is a new injection molding process in recent years.
Low pressure molding production is a process uses hot liquidify Polyamide material.
Our research team make their efforts on the designing of low-pressure machine, King's Solution Corp. recently have 5 new patents (i.e. Taiwan patents no. M496549, M525837 and M530471), (China patents no. ZL201420646124.2 and no. ZL201420647977.8).
Our LPM Low Pressure Molding Machine, CE marking certified, with its very low injection pressure 20~500psi (1.5~35 BAR) flow into the mold cavity and electronic parts to be encapsulated. Hot-melt Polyamide starts cooling down when it touches the cavity, then apply continuous injection pressure. The over-molding process will not harm any fragile solder joint of the circuit board (PCB Overmolding). At first, it's uses to replace toxic and bulky conventional potting processes, gradually spread to the world in market such as automotive market, medical, military, domestic appliance market.
Low pressure molding leads the way to protect fragile electronics components against moisture, dust-proof, moisture proof, insulation, temperature resistance, flame retardant, vibration reduction, well bonding, waterproof etc. Suitable for electronic components such as micro switches that require waterproof function, automotive electronic sensor.
Ideal for PCB Overmolding, Waterproof Cable Overmolding, Waterproof Micro Switch.
read more:
- What is Low Pressure Molding (LPM)?
- What materials are used in Low Pressure Molding (LPM)? Changing the world with low-pressure materials
- Low Pressure Injection Molding Upgraded: The low-carbon choice of electric vehicle manufacturers
- Sin Yin Intelligent Develops Injection Machines Suitable for Electronic Waterproof Products Based on Plastic Characteristics - Part 1
- Sin Yin Intelligent Develops Injection Machines Suitable for Electronic Waterproof Products Based on Plastic Characteristics - Part 2
- How Does Low-Pressure Molding Process Improve the Development Technology of Electric Vehicle Components?
- LPM Low-Pressure Injection - Special Sealant Technology - Replacing the Conventional Potting and Sealing Tool
- Complete sealing of the components provides water-tight encapsulation.
- Short cycle time.
- Offer one axis control for servo motor.
- Machine driven by compressed air and servo motorized, energy saving, specially for clean room and laboratory.
- The Pressure adjusting valve control the pressure of injection.
- Teflon coated melting tank made from Aluminum alloy, heated evenly & rapidly, much easier to clean.
- Sealing cover, Safety Light curtain, pneumatic door and dual palm safety button for personnel safeguard.
- Two tie-bar design for molding small parts, operation easily.
- Nozzle connected to melt tank, injection unit driven by air pressure.
- Nozzle directly connected to gear pump and no heating pipe, avoid crystallization.
-
TWO PID thermal temperature control zones(Melting tank and nozzle).
-
Multi-Language PC Base industrial type Linux core system.
-
1000 sets of mold settings can be stored and export as backup.
-
Complete record of history settings & warnings. Built in USB connect.
- On-line control and maintenance service.
MODEL | KL-VHS-01-1-09-1 | |||
---|---|---|---|---|
Injection Unit | ||||
Injection Type | Horizontal injection from parting line | |||
Capacity | L | 3.5 / 6.5 (Optional) | ||
Injection Capacity | ml / r | 8.98 | ||
Pump Speed | r.p.m | 0~100 | ||
Nozzle Stroke | mm | 50 | ||
Nozzle Contact Force | Tf | 0.06 | ||
Clamping Unit | ||||
Clamping System | Pneumatic | Air Booster | ||
Clamping Force | Tf | 1 | 4 | |
Opening Stroke | mm | 160 | ||
Mould Space | mm | 285 | ||
Min Mould Space | mm | 125 | ||
Overall Size of Platens | mm | 400*150 | ||
Space Between Columns | mm | N / A | ||
Size Of Shuttler Platen | mm | 850*160 (Optional) | ||
Shuttle Plate Stroke | mm | 500 (Optional) | ||
Ejector | Pneumatic | |||
Ejector Force | Tf | 0.12 | ||
Ejector Stroke | mm | UP 25 | ||
Electrical Equipment & General | ||||
Power Source / Voltage | V / HZ | 1 ø - 220v (60Hz / 50Hz) | ||
Drive Motor | kw | 0.4 | ||
Heater | kw | 4.8 | ||
Temperature Control Zone | zone | 3 | ||
Hydraulic System Pressure | kgf / cm2 | 6 | ||
Machine Dimension | m | 1.65*1.00*1.75 | ||
Machine Weight | ton | 0.8 |